Southern Vintage Siding Jacksonville, Florida
Custom Ordering Process

Price your order in about ten seconds.

Choose your pattern, enter your linear feet, and your estimate appears on the right. When it looks right, send it straight to the shop.

1

Choose Your Pattern

$26.00 / ft · S-lock incl.

Select from our four authentic patterns: 3" Pattern, 6" Pattern, Diamond, or Mesa. All four run $26.00 a linear foot — pattern and S-lock included. No minimum order.

2

Add Your Sections

2 panels per section is usual

Put in the length of each section you need, in feet. Leave anything you don't need at 0. Two panels per section is the usual — that's what a wall taller than about 4 ft takes. Everything is in 3" Pattern; roofing is priced separately at $38.00 a foot.

Section Panels Length each
How many panels do I need for my camper wall?

Siding is 49" wide by the length you choose, so one panel covers about 4 ft of height — which is why a typical camper or trailer wall takes two panels per section. Roofing is different: it's continuous, one piece with two Pittsburgh seams (S-locks), measured front to rear over the top. Check your numbers against the measuring guide below, and allow a little extra for trim; the S-lock overlaps slightly where two panels meet.

3

Finalize Your Quote

Your pattern, measurements and estimate are attached automatically — we just need to know who you are.

We'll check your measurements and send your invoice, typically within 24–48 hours. Once payment is received we schedule your cutting. Pick up is one Saturday a month in Jacksonville, and we will coordinate a date with you.

Measuring guide

Measurements needed

What to measure

  • Side panels: Length (front to rear) x Height (tallest point)
  • Front/Rear panels: Width (left to right at widest point)
  • Roof sections: Front to rear over-the-top measurement

Measure twice. Custom lengths are cut to your specification, so the numbers you send are the numbers we roll.

Diagram of a vintage trailer showing where to measure length and height for siding, and the front-to-rear over-the-top measurement for roofing
Custom Ordering Process

How to Order Your Vintage Siding

1

Choose Your Pattern

Select from our four authentic patterns: 3" Pattern, 6" Pattern, Diamond, or Mesa.

2

Measure Your Trailer

Measurements needed:

  • Side panels: Length (front to rear) x Height (tallest point)
  • Front/Rear panels: Width (left to right at widest point)
  • Roof sections: Front to rear over-the-top measurement
3

Finalize Your Quote

Enter your pattern and measurements above and your estimate appears on screen. Send it over and we'll check it against your measurements and issue your invoice, typically within 24–48 hours.

4

Production & Pick Up

Once payment is received we schedule your cutting and manufacture your siding to your exact specifications. Pick up is one Saturday a month here in Jacksonville — we will coordinate a date with you so you can plan the trip.